A Las Vegas casino prevented from getting hacked. Find out How.

Channel 9 Code Room Videos

(Or A Developer’s Fantasy come true)

I don’t know if I will be able to disclose everything here but first
bookmark this.
What is so special about this code?
The Code Room has 3 videos. Watch them in your office or home in the still of the night.
Like you, I was an innocent geek developer, until I became part of a crack team. We were asked to team up with programmers & technologists, and challenged to do the impossible. Again and again.
First, we were locked up inside an intercity warehouse with only a desk,a laptop, and a few partially charged batteries…and asked to complete an ecommerce website.
Then, the crack team was asked to create a mobile app for allowing a mobile phone in a mall to talk to a particular store using Bluetooth. And… finally the most dangerous mission… detecting a security breach inside a casino and catching the hackers. And… finally the most dangerous mission… detecting a security breach inside a casino and catching the hackers.
In each case, we succeeded — against all odds. (I can hear you saying you would have done even better…but would you?
See the videos and decide for yourself).
But now I feel threatened by the hackers at the casinos. So I’ve decided not to take chances, but pass on the code to fellow developers like you.
Promise me that our to-do-or-die “spirit for challenges” will always fly high.
Pass this clue to every developer you know who dreams of being part of a crack team.
I will write to you… again.
Until then,
Agent 9
Member, Crack Team Code Room

©2007 Microsoft Corporation. All rights reserved. Microsoft is a registered trademark of Microsoft Corporation in the United States and/or other countries. Review our Privacy Statement: If you prefer not to receive future promotional e-mails of this type from Microsoft, please send an email at erase@microsoft.com. We will promptly update your preferences; however, you may still receive previously initiated promotional communications from Microsoft.


.NET Interview Questions and Answers

  • · Differences

1. Difference between Classic ASP and ASP.Net?

§ ASP is Interpreted language based on scripting languages like Jscript or VBScript.

§ ASP has Mixed HTML and coding logic.

§ Limited development and debugging tools available.

§ Limited OOPS support.

§ Limited session and application state management.

§ Poor Error handling system.

§ No in-built support for XML.

§ No fully distributed data source support.

§ ASP.Net is supported by compiler and has compiled language support.

§ Separate code and design logic possible.

§ Variety of compilers and tools available including the Visual studio.Net.

§ Completely Object Oriented.

§ Complete session and application state management.

§ Full proof error handling possible.

§ Full XML Support for easy data exchange.

§ Fully distributed data source support.

2. What’s the difference between Response.Write() and Response.Output.Write()?
Answer: Response.Outout.Write allows us to write the formatted out put.

3. Can you explain the difference between an ADO.NET Dataset and an ADO Recordset?

§ A DataSet can represent an entire relational database in memory, complete with tables, relations, and views, A Recordset can not.

§ A DataSet is designed to work without any continuing connection to the original data source; Recordset maintains the contentious connection with the original data source.

§ There’s no concept of cursor types in a DataSet, They are bulk loaded, while Recordset work with cursors and they are loaded on demand.

§ DataSets have no current record pointer, you can use For Each loops to move through the data. Recordsets have pointers to move through them.

§ You can store many edits in a DataSet, and write them to the original data source in a single operation. Recordset can have a single edit at a time.

§ Dataset can fetch source data from many tables at a time, for Recordset you can achieve the same only using the SQL joins.

4. What is the difference between an abstract method & virtual method?
Answer: An Abstract method does not provide an implementation and forces overriding to the deriving class (unless the deriving class also an abstract class), where as the virtual method has an implementation and leaves an option to override the it in the deriving class. Thus Virtual method has an implementation & provides the derived class with the option of overriding it. Abstract method does not provide an implementation & forces the derived class to override the method.

5. What are the different types of assemblies? Explain.
Answer: Assemblies can be static or dynamic. Static assemblies can include .NET Framework types (interfaces and classes), as well as resources for the assembly (bitmaps, JPEG files, resource files, and so on). Static assemblies are stored on disk in portable executable (PE) files. You can also use the .NET Framework to create dynamic assemblies, which are run directly from memory and are not saved to disk before execution. You can save dynamic assemblies to disk after they have executed.

6. What are the difference between Structure and Class?

§ Structures are value type and Classes are reference type.

§ Structures can not have contractors or destructors. Classes can have both contractors and destructors.

§ Structures do not support Inheritance, while Classes support Inheritance.

7. What are the difference between const and readonly?

§ A const can not be static, while readonly can be static.

§ A const need to be declared and initialized at declaration only, while a readonly can be initialized at declaration or by the code in the constructor.

§ A const’s value is evaluated at design time, while a readonly’s value is evaluated at runtime.

8. Differences between dataset.clone and dataset.copy
Answer: dataset.clone copies just the structure of dataset (including all the datatables, schemas, relations and constraints.), However it doesn’t copy the data. On the other hand dataset.copy, copies both the dataset structure and the data.

9. Describe the difference between inline and code behind.
Answer: Inline code written along with the html and design blocks in an .aspx page. Code-behind is code written in a separate file (.cs or .vb ) and referenced by the .aspx page.

10. What is Difference between Namespace and Assembly?
Answer: Namespace is a logical design-time naming convenience, whereas an assembly establishes the name scope for types at run time.

11. What is the difference between early binding and late binding?
Answer: Calling a non-virtual method, decided at a compile time is known as early binding. Calling a virtual method (Pure Polymorphism), decided at a runtime is known as late binding.

12. What is the difference between User Control and Custom Control?
Answer: Custom Controls are compiled code (Dlls), easier to use, difficult to create, and can be placed in toolbox. Drag and Drop controls. Attributes can be set visually at design time. Can be used by Multiple Applications (If Shared Dlls), Even if Private can copy to bin directory of web application add reference and use. Normally designed to provide common functionality independent of consuming Application. User Controls are similar to those of ASP include files, easy to create, can not be placed in the toolbox and dragged – dropped from it. A User Control is shared among the single application files.

13. What is the difference between ASP Session State and ASP.Net Session State?
Answer: ASP session state relies on cookies, Serialize all requests from a client, does not survive process shutdown, Can not maintained across machines in a Web farm.

14. What is the difference bettween DataReader and DataSet?
Answer: DataReader represents only one database record at a time. You must call the Read() method to fetch each new record from the underlying database table into memory. Each time you call Read() again, the previously fetched record is lost. DataSet is on the other hand, enables you to represent the results of a database query in your server’s memory. Because a DataSet provides you with a memory-resident representation of data, you can work with the results of a database query as a whole. DataReader must remain connected to a database table. A DataReader is tied down to its underlying data source. The DataSet object is central to supporting disconnected, and distributed data scenarios with ADO.NET. The DataSet is a memory-resident representation of data that provides a consistent relational programming model regardless of the data source. It might be helpful to think of a DataReader as a forward-only recordset. A DataSet, on the other hand, is similar to a disconnected, client-side, static recordset. DataSets also require more overhead to create and populate than DataReaders.

  •  Abbreviations

1. CLR = Common Language Runtime

2. CLS = Common Language Specifications

3. CTS = Common Type Specifications

4. GC = Garbage Collector.

5. WSDL = Web Services Description Language.

6. MSIL = Microsoft Intermediate Language.

7. CIL = Common Intermediate Language – MSIL.

8. JIT = Just In Time.

9. PE = Portable Executable – A file format.

10. COFF = Common Object File Format – A file format.

11. GAC = Global Assembly Cache.

12. DDL = Data Definition Language.

13. DML = Data Manipulation Language.

14. CAS = Code Access Security.

15. RCW = Runtime Callable Wrapper.

16. COM = Component Object Model.

17. CCW = COM Callable Wrapper.

18. DOM = Document Object Model.

19. DNA = Distributed interNet Applications Architecture.

20. GUID = Globally Unique Identifier.

21. MS-DTC = Microsoft Distributed Transaction Coordinator.

22. OLTP = Online Transaction Processing.

23. OLAP = Online Analytical Processing.

24. RAD = Rapid Application Development.

25. SMTP = Simple Mail Transfer Protocol.

26. SOAP = Simple Object Access Protocol.

27. TCP = Transport Control Protocol.

28. TLB = Type Library.

29. UDF = Uniform Data Format.

30. UDDI = Universal Description, Discovery and Integration.

  • True/False

1. A Web service can only be written in .NET?
Answer: False (Java also)

2. To test a Web service you must create a windows application or Web application to consume this service?
Answer: False, the webservice comes with a test page and it provides HTTP-GET method to test it.

  • Simple Questions

1. What is IL? (What is MSIL or CIL, What is JIT?)
MSIL is the CPU –independent instruction set into which .Net framework programs are compiled. It contains instructions for loading, storing initializing, and calling methods on objects.

2. What is CLR?
Answer: CLR also known as Common Language Run time provides a environment in which program are executed, it activate object, perform security check on them, lay them out in the memory, execute them and garbage collect them.

3. What is CTS?
Answer: The common type system is a rich type system, built into the common language runtime, which supports the types and operations found in most programming languages.

4. What is CLS?
Answer: CLS also known as Common Language Specification defines the rules which all language must support, in order to be a part of .Net framework. The Common Language Specification is a set of constructs and constraints that serves as a guide for library writers and compiler writers. It allows libraries to be fully usable from any language supporting the CLS, and for those languages to integrate with each other. The Common Language Specification is a subset of the common type system. The Common Language Specification is also important to application developers who are writing code that will be used by other developers.

5. Which class does the web page belong to in ASP.Net?
Answer: System.Web.UI.Page

6. Which class deals wit the user’s locale information?
Answer: System.Web.UI.Page.Culture

7. What data type does the RangeValidator control support?
Answer: Integer, Date and String.

8. What is the difference between Server.Transfer and Response.Redirect?
Answer: Server.Transfer, transfers the control of a web page, posting a form data, while Response.Redirect simply redirects a page to another page, it can not post a form data to another page. Server.Transfer is more efficient over the Response.Redirect, because Response.Redirect causes a round trip to server as the page is processed once again on the client and a request is made to server there after.

9. Can you give an example of what might be best suited to place in the Application_Start and Session_Start subroutines?
Answer: All the global declarations or the variables used commonly across the application can be deployed under Application_Start. All the user specific tasks or declarations can be dealt in the Session_Start subroutine.

10. What is viewState?
Answer: ViewState is a .Net mechanism to store the posted data among post backs. ViewState allows the state of objects to be stored in a hidden field on the page, saved on client side and transported back to server whenever required.

11. What is the lifespan for items stored in ViewState?
Answer: Items stored in a ViewState exist for the life of the current page, including the post backs on the same page.

12. Can we disable ViewState, If, yes how?
Answer: ViewState can be disabled by using “EnableViewState” property set to false.

13. What’s a bubbled event?
Answer: When a complex control like datalist or datagrid, which contains a child control, using an itemcommand can listen to the events raised by the child control in the main control. The process of listening to the child control in the main or parent control is called as event bubbling.

14. What is an assembly?
Answer: Assemblies are the building blocks of the .NET framework. They are the logical grouping of the functionality in a physical file.

15. What are different types of Assemblies?
Answer: Single file and multi file assembly. Assemblies can be static or dynamic. Private assemblies and shared assemblies

16. Which method do you invoke on the DataAdapter control to load your generated dataset with data?
Answer: DataAdapter’s fill () method is used to fill load the data in dataset.

17. Can you edit data in the Repeater control?
Answer: No, it just reads the information from its data source

18. Which template is to be provided in the Repeater control in order to display a data? Which template will display every other row in another color?
Answer: ItemTemplate, AlternatingItemTemplate

19. What are the most important property and most important method of a Repeater control?
Answer: The DataSource property and DataBind() method.

20. How many classes can a single .NET DLL contain?
Answer: It can contain many classes.

21. What are the advantages of an assembly?
Answer: Increased performance. Better code management and encapsulation. It also introduces the n-tier concepts and business logic.

22. What is the purpose of an Assembly?
Answer: An assembly controls many aspects of an application. The assembly handles versioning, type and class scope, security permissions, as well as other metadata including references to other assemblies and resources. The rules described in an assembly are enforced at runtime

23. What a static assembly consist of in general?
Answer: In general, a static assembly consist of the following four elements:

§ Assembly Manifest, which contains the assembly metadata.

§ Type Metadata.

§ MSIL code that implements the types.

§ A set of resources.

From above all only the manifest is required, however the other types and resources add the additional functionality to the assembly.

24. What is GAC or Global Assembly Cache?
Answer: Global Assembly Cache (GAC) is a common place to share the .NET assemblies across many applications. GAC caches all strong named assembly references within it. All System assemblies that come with the .NET framework reside in the GAC.

25. How to view an assembly?
Answer: We can use the tool “ildasm.exe” known as “Assembly Disassembler” to view the assembly.

26. What is Authentication and Authorization?
Answer: Authentication is the process of identifying users. Authentication is identifying/validating the user against the credentials (username and password) and Authorization performs after authentication. Authorization is the process of granting access to those users based on identity. Authorization allowing access of specific resource to user.

27. What are the types of Authentication? Describe.
Answer: There are 3 types of Authentication. Windows, Forms and Passport Authentication.

§ Windows authentication uses the security features integrated into the Windows NT and Windows XP operating systems to authenticate and authorize Web application users.

§ Forms authentication allows you to create your own list/database of users and validate the identity of those users when they visit your Web site.

§ Passport authentication uses the Microsoft centralized authentication provider to identify users. Passport provides a way to for users to use a single identity across multiple Web applications. To use Passport authentication in your Web application, you must install the Passport SDK.

28. What are the types of comment in C#?
Answer: There are 3 types of comments in C#.
Single line (//), Multi line (/* */)and Page Comments (///).

29. What is an ArrayList?
Answer: The ArrayList object is a collection of items containing a single data value.

30. What is a HashTable?
Answer: The Hashtable object contains items in key/value pairs. The keys are used as indexes, and very quick searches can be made for values by searching through their keys.

31. What is SortedList?
Answer: The SortedList object contains items in key/value pairs. A SortedList object automatically sorts items in alphabetic or numeric order.

32. What is a Literal Control?
Answer: The Literal control is used to display text on a page. The text is programmable. This control does not let you apply styles to its content!

33. What is CAS or Code Access Security?
Answer: CAS is the part of the .NET security model that determines whether or not a piece of code is allowed to run, and what resources it can use when it is running. For example, it is CAS that will prevent a .NET web applet from formatting a hard disk.

34. What is Side-by-Side Execution
Answer: The CLR allows any versions of the same-shared DLL (shared assembly) to execute at the same time, on the same system, and even in the same process. This concept is known as side-by-side execution.

35. What are the different types of Caching?
Answer: There are three types of Caching:

§ Output Caching: stores the responses from an asp.net page.

§ Fragment Caching: Only caches/stores the portion of page (User Control)

§ Data Caching: is Programmatic way to Cache objects for performance.

36. What are the different types of Validation Controls?
Answer: There are six types of validation controls available:

§ RequiredFieldValidator

§ RangeValidator

§ RegularExpressionValidator

§ CompareValidator

§ CustomValidator

§ ValidationSummary

37. How to Manage State in ASP.Net?
There are several ways to manage a state.

§ ViewState

§ QueryString

§ Cookies

§ Session

§ Application

38. What base class all Web Forms inherit from?
Answer: System.Web.UI.Page.

39. What method do you use to explicitly kill a user’s Session?
Answer: HttpContext.Current.Session.Abandon().

40. What are the layouts of ASP.NET Pages?
Answer: GridLayout and FlowLayout. GridLayout positions the form object on absolute x and y co-ordinates of the screen. FlowLayout positions the form objects relative to each other.

41. What is the Web User Control?
Answer: Combines existing Server and HTML controls by using VS.Net. to create functional units that encapsulate some aspects of UI. Resides in Content Files, which must be included in project in which the controls are used.

42. What is the Composite Custom Control?
Answer: combination of existing HTML and Server Controls.

Tricky Questions

1. If I’m developing an application that must accommodate multiple security levels though secure login and my ASP.NET web application is spanned across three web-servers (using round-robin load balancing) what would be the best approach to maintain login-in state for the users?
Answer: You can use the security state maintained using a database. (Use Authentication mode as database)

2. What’s the difference between Codebehind=”MyCode.aspx.cs” and src=”MyCode.aspx.cs” mce_src=”MyCode.aspx.cs”?
Answer: Visual Studio uses the Codebehind attribute to distinguish the page source or programming logic from the design. Also the src attribute will make the page compile on every request. That is the page will not be compiled in advance and stored in the bin as a dll instead it will be compiled at run time.

3. Suppose you want a certain ASP.NET function executed on MouseOver over a certain button or textbox. Where do you add an event handler?
Answer: Every web control has a ability to add the attributes on client side which will execute on client side and run a client side script like a javascript function.
btnSubmit.Attributes.Add(“onMouseOver”,”someClientCode();”) //For on mouse over of a button
TextBox1.Attributes.Add(“onFocus”,“ClearText();”) //For on focus of a text box

4. Explain what a diffgram is and a good use for one?
Answer: The DiffGram is one of the two XML formats that you can use to render DataSet object contents to XML. For reading database data to an XML file to be sent to a Web Service.

5. What base class do all Web Forms inherit from?
Answer: The Page class.

6. Name two properties common in every validation control?
Answer: ControlToValidate and Text property.

7. What tags do you need to add within the Datagrid tags to bind columns manually?
Answer: Set AutoGenerateColumns Property to false on the Datagrid tag

8. What tag do you use to add a hyperlink column to the DataGrid?
Answer: asp:HyperLinkColumn

9. What is the transport protocol you use to call a Web service?
Answer: SOAP (Simple Object Access Protocol) is the preferred protocol.

10. Where on the Internet would you look for Web services?
Answer: http://www.uddi.org

11. Which control would you use if you needed to make sure the values in two different controls matched?
Answer: CompareValidator Control

12. What are the assembly entry points? An Assembly can have how many entry points at a time?
Answer: An assembly can have only one entry point from DllMain, WinMain or Main.

13. What does an assembly contain?
• Manifest – The metadata describing the information below.
• Assembly name – Aids in versioning and visibility scope.
• Version information – The version number is integrated into the assembly’s identity.
• Types – Boundaries and scopes of methods, classes, properties, events, attributes.
• Locale – Information describing language/culture.
• Cryptographic Hash – Public key encoded hash acting as version/security check.
• Security Permissions – The permissions within the assembly determine the permissions that can be granted for all aspects of the assembly contents.

14. What does an assembly manifest contains?
Answer: It contains assembly name, version number (major.minor.build.revision) and culture Information. It also specifies the strong name information, which is useful for shared assemblies, and list of files, an assembly contains. It also provides information for type references in an assembly and other referenced assemblies.

15. Which tool is used to deploy an assembly, so as the assembly is available to all the application?
Answer: The GacUtil.exe is the tool, which allows us to add any assembly to the windows GAC.

16. How many catch statements can be associated with single try statement?
Answer: There can be a zero or more catch statement for each try statement. So it has not limit to the number of catch statement per try statement.

17. What is Console and System a Class/a Data Member/a routine/a namespace or a type?
Answer: Console is a class and System is namespace.

18. How many values can be returned from a method in C#?
Answer: Only one value can be returned from method, however you can use ref or out variable to change more than one value in called method.

19. How to declare a variable named this in C#, with data type string?
Answer: string @this;

20. Can we change the dimension of Array at run time like Array [3, 4]?
Answer: Yes, We can change only the first position of array dimension.

21. What keyword is used to accept a variable number of parameter in a method?
Answer: “params” keyword is used as to accept variable number of parameters.

22. What is a Namespace? What is the use of a namespace?
Answer: Namespaces are logical grouping of classes and other types in hierarchical structure. Namespaces are useful to avoid collision or ambiguity among the classes and type names. Another use of the namespace is to arrange a group of classes for a specific purpose.

23. What does a keyword using works for?
Answer: Using is just a convention or a short-cut method which allows us to access the classes in a namespace by referencing it once. So when ever we want use the classes or methods in them, we can avoid typing the entire namespace hierarchy. However it is not a good practice when there are likely chances to have name ambiguity or collision of class names.

24. What is Enums in C#?
Answer: Enums or Enumerators are used to declare a set of related constants (default start with 0); they are only available with primitive data types like int and short etc.

25. What is Delegates?
Answer: Delegates are a type-safe, object-oriented implementation of function pointers and are used in many situations where a component needs to call back to the component that is using it. Delegates are generally used as basis of events, which allow any delegate to easily be registered for as event.

26. Which are the namespaces that are imported automatically by Visual Studio in ASP.Net?
Answer: There are 7 namespaces which are imported automatically.

§ System

§ System.Collections

§ System.IO

§ System.web

§ System.web.UI

§ System.web.UI.HTMLControls

§ System.web.UI.WebControls

27. Which namespaces are used for data access?

§ System.Data

§ System.Data.OleDB

§ System.Data.SQLClient

28. What do you mean by boxing and un-boxing?
Answer: C# provides us with Value types and Reference Types. Value Types are stored on the stack and Reference types are stored on the heap. The conversion of value type to reference type is known as boxing and converting reference type back to the value type is known as un-boxing.
int x = 10;
object o = x ; // Implicit boxing
object o = (object) x; // Explicit Boxing
x = o; // Implicit Un-Boxing
x = (int)o; // Explicit Un-Boxing

29. What are the different methods available under sqlcommand class to access the data?

§ ExecuteReader –Used where one or more records are returned – SELECT Query.

§ ExecuteNonQuery – Used where it affects a state of the table and no data is being queried – INSERT, UPDATE, DELETE, CREATE and SET queries.

§ ExecuteScalar – Used where it returns a single record(a single value normally) – SQL Functions like MIN(), NAX()

30. What are the different types of Session state management options available with ASP.NET?
Answer: ASP.NET provides In-Process & Out-of-Process state management,
Also known as “In-Proc” and “Out-Proc”. In-Proc stores the session in memory of the web server, that is on the same server the ASP.Net page is.
On the other hand Out-Proc session state management stores the session data on external data source, which can be a SQL Server or Server State Service. Out-of-Process state management requires the objects stored in session, must be serializable.

31. What is Remoting? Give Example.
Answer: Remoting is a means by which one operating system process, or program, can communicate with another process. The two processes can exist on the same computer or on two computers connected by a LAN or the Internet. Web services are probably the best known type of remoting, but they are not the only option.

32. What is Marshalling?
Answer: Marshaling is a process of making an object in one process (the server) available to another process (the client). There are two ways to achieve the marshalling.

i. Marshal by value: the server creates a copy of the object passes the copy to the client. When a client makes a call to an object marshaled by value (MBV), the server creates an exact copy and sends that copy to the client. The client can then use the object’s data and executable functionality directly within its own process or application domain without making additional calls to the server. Objects that the application accesses frequently are best remoted using MBV.

ii. Marshal by reference: the client creates a proxy for the object and then uses the proxy to access the object. When a client makes a call to an object marshaled by reference (MBR), the .NET framework creates a proxy in the client’s application domain and the client uses that proxy to access the original object on the server. Large objects that the application accesses relatively infrequently are good candidates for MBR.

33. What is a Static class? What are its features?
Answer: Static class is a class which can be used or accessed without creating an instance of the class.
Important Features:

i. Static class only contains static members and a private constructor.

ii. Static class cannot be instantiated.

iii. Static classes are sealed by default and therefore cannot be inherited.

34. What is sealed class? What are its features?
Answer: Sealed classes are those classes which can not be inherited and thus any sealed class member can not be derived in any other class. A sealed class cannot also be an abstract class.
In C# structs are implicitly sealed; therefore, they cannot be inherited.

35. Can we declare a method as sealed?
Answer: In C# a method can’t be declared as sealed. However when we override a method in a derived class, we can declare the overridden method as sealed. By declaring it as sealed, we can avoid further overriding of this method.
using System;
class MyClass1
public int x;
public int y;
public virtual void Method() {
Console.WriteLine(“virtual method”); }
class MyClass : MyClass1
public override sealed void Method() {
Console.WriteLine(“sealed method”); }
class MainClass
{ public static void Main() {
MyClass1 mC = new MyClass();
mC.x = 110;
mC.y = 150;
Console.WriteLine(“x = {0}, y = {1}”, mC.x, mC.y);
mC.Method(); }

36. What is a DataSet ?
Answer: A DataSet is an in memory representation of data loaded from any data source.

37. What is a DataTable?
Answer: A DataTable is a class in .NET Framework and in simple words a DataTable object represents a table from a database.

38. If you want to view an Assembly how to you go about it? What is ILDASM?
Answer: You can use the MSIL Disassembler (Ildasm.exe) to view Microsoft intermediate language (MSIL) information in a file. If the file being examined is an assembly, this information can include the assembly’s attributes, as well as references to other modules and assemblies. This information can be helpful in determining whether a file is an assembly or part of an assembly, and whether the file has references to other modules or assemblies.

39. Where is version information stored of an assembly?
Answer: The version number is stored in the assembly manifest along with other identity information, including the assembly name and public key, as well as information on relationships and identities of other assemblies connected with the application.

40. Is versioning applicable to private assemblies?
Answer: No

41. How to create a shared assembly or add an assembly to GAC?
Answer: There are several ways an assembly can be added to GAC.

i. Use .msi installer designed to work with the global assembly cache.

ii. Use GACUtil.exe provided by the .NET Framework SDK.

iii. Use Windows Explorer to drag assemblies into the cache.

42. What is strong Name?

43. What is reflection?
Answer: All .NET compilers produce metadata about the types defined in the modules they produce. This metadata is packaged along with the module (modules in turn are packaged together in assemblies), and can be accessed by a mechanism called reflection. The System.Reflection namespace contains classes that can be used to interrogate the types for a module/assembly. Reflection is ability to find information about types contained in an assembly at run time.

44. How can I produce an assembly?
Answer: Simply compile your class/module with the following command.
C#.Net – CSC /t:library yourclassname.cs
VB.Net – VBC /t:library yourmodulename.vb

45. What is an Application Domain? How they get created?
Answer: An Application Domain can be thought of as a lightweight processes controlled by the .Net runtime. Application Domains are usually created by hosts like Windows Shell, ASP.NET and IE. When you run a .NET application from the command-line, the host is the Shell. The Shell creates a new Application Domain for every application.

46. Do I have any control over the garbage collection algorithm?
Answer: Yes, we have a limited control over the GC algorithm, For example, the System.GC class exposes a Collect method – this forces the garbage collector to collect all unreferenced objects immediately.

47. What is a life span of a static variable?
Answer: A static variable’s life span is till the class is in memory.

48. What is a Page Life Cycle of an ASP.Net page?
Answer: There are various stages described as under.

§ Init

§ LoadViewState

§ LoadPostBackData

§ Load

§ RaisePostBackDataChangedEvent

§ RaisePostBackEvents

§ Pre-Render

§ SaveViewState

§ Render

§ Unload

49. Can the action attribute of a server-side <form>tag be set to a value and if not how can you possibly pass data from a form to a subsequent Page?
Answer: No, Assigning value will not work because will be overwritten at the time of rendering. We can assign value to it by register a startup script which will set the action value of form on client-side. On other hand we can use Server.Transfer or Response.Redirect.

50. How do you turn off cookies in one page of your asp.net application?
Answer: We may not use them at the max, However to allow the cookies or not, is client side functionality.

51. Which method do you use to redirect to user to another page without performing a round trip to Client?
Answer: Server.Transfer(“AnotherPage.aspx”).

52. How many namespaces are in .NET version 1.1?
Answer: 124.

53. Should Validation occur on Client/Server Side for Date Input?
Answer: Both. Client-side reduces extra round-trip. Server-Side ensures prevention against hacking and failure against automated requests.

54. What are the web form events?

i. The first event that occurs in the life of a Web Form is the Init event. This is raised so that we can have initialization code for the page. The controls on the page are not yet created at this point. This event is raised once for each user of the page.

ii. The Load event follows the Init event. Subsequently, it is raised each time the page is requested. When this event is raised, all child controls of the Web Form are loaded and accessible. You should be able to retrieve data and populate the controls so that they can render themselves on the page when sent back to the client.

iii. The PreRender event happens just before the page is rendered and sent back to the client. We don’t often handle this event; however, it depends on the situation.

iv. The last event in the life of a Web Form is the Unload event. This happens when the page is unloaded from memory. Final cleanup should be done here.

  • OOPS

1. What is a class?
Answer: Class is concrete representation of an entity. It represents a group of objects, which hold similar attributes and behavior. It provides Abstraction and Encapsulations.

2. What is an Object? What is Object Oriented Programming?
Answer: Object represents/resembles a Physical/real entity. An object is simply something you can give a name. Object Oriented Programming is a Style of programming that represents a program as a system of objects and enables code-reuse.

3. What is Encapsulation?
Encapsulation is binding of attributes and behaviors. Hiding the actual implementation and exposing the functionality of any object. Encapsulation is the first step towards OOPS, is the procedure of covering up of data and functions into a single unit (called class). Its main aim is to protect the data from out side world.

4. What is Abstraction?
Answer: Hiding the complexity. It is a process of defining communication interface for the functionality and hiding rest of the things.

5. What is Overloading?
Answer: Adding a new method with the same name in same/derived class but with different number/types of parameters. It implements Polymorphism.

6. What is Overriding?
Answer: A process of creating different implementation of a method having a same name as base class, in a derived class. It implements Inheritance.

7. What is Shadowing?
Answer: When the method is defined as Final/sealed in base class and not override able and we need to provide different implementation for the same. This process is known as shadowing, uses shadows/new keyword.

8. What is Inheritance?
Answer: It is a process of acquiring attributes and behaviors from another object (normally a class or interface).

9. What is an Abstract class?
Answer: An abstract class is a special kind of class that cannot be instantiated. It normally contains one or more abstract methods or abstract properties. It provides body to a class.

10. What is an Interface?
Answer: An interface has no implementation; it only has the signature or in other words, just the definition of the methods without the body.

11. What is Polymorphism?
Answer: Mean by more than one form. Ability to provide different implementation based on different number/type of parameters.

12. What is Pure-Polymorphism?
Answer: When a method is declared as abstract/virtual method in a base class and which is overridden in a base class. If we create a variable of a type of a base class and assign an object of a derived class to it, it will be decided at a run time, which implementation of a method is to be called.
This is known as Pure-Polymorphism or Late-Binding.

13. What is a Constructor?
Answer: A special Method Always called whenever an instance of the class is created.

14. What is a Destructor?
Answer: A special method called by GC. just before object is being reclaimed by GC.

15. How a base class method is hidden?
Answer: Hiding a base class method by declaring a method in derived class with keyword new. This will override the base class method and old method will be suppressed.

16. What Command is used to implement properties in C#?
Answer: get & set access modifiers are used to implement properties in c#.

17. What is method overloading?
Answer: Method overloading is having methods with same name but carrying different signature, this is useful when you want a method to behave differently depending upon a data passed to it.

18. Can constructors have parameters?

19. What are Static Assembly and Dynamic Assembly?
Answer: Static assemblies can include .NET Framework types (interfaces and classes) as well as resources for the assembly (bitmaps, JPEG files, resource files, and so forth). Static assemblies are stored on disk. Dynamic assemblies run directly from memory and are not saved to disk before execution.

20. Describe the functionality of an assembly.
Answer: It is the smallest unit that has version control. All types and resources in the same assembly are versioned as a unit and support side by side execution. Assemblies contain the metadata and other identities which allow the common language runtime to execute. They are the boundaries providing the type check. They the unit where security permissions are requested and granted.

21. What is serialization?
Answer: Serialization is the process of converting an object into a stream of bytes. De-serialization is the opposite process of creating an object from a stream of bytes. Serialization/De-serialization is mostly used to transport objects (e.g. during remoting), or to persist objects (e.g. to a file or database). There are two separate mechanisms provided by the .NET class library for serialization – XmlSerializer and SoapFormatter and BinaryFormatter. Microsoft uses XmlSerializer for Web Services, and uses SoapFormatter/BinaryFormatter for remoting.

  •  SQL: Queries

1. Write a query to select the second highest salary from a table.
Answer: SELECT max(salary) AS salary2 FROM orders WHERE salary < (SELECT max(salary) AS salary1 FROM orders)

2. Write a query to select the 5th highest salary from a table.
Answer: SELECT min(salary) AS high5 FROM employee WHERE salary IN(SELECT DISTINCT TOP 5 salary FROM orders ORDER BY salary DESC)

3. How to find duplicate records with the number they are duplicated?
Answer: SELECT Id, count (*) as number_records from table group by id having count (*) > 1.

  • SQL: Questions

1. What is the difference between Delete and Truncate command in SQL?
Answer: Delete command and truncate command both will delete the data, however the truncate command can not be rolled back as delete can be. The delete command can be used for selected records using the where clause but with the truncate command we have to loose data. DELETE statement is a logged operation and hence takes more time then truncate.

2. What is Magic Table in SQL?
Answer: The insert and Delete commands are known as magic tables in SQL.

3. Can Primary key is a Foreign Key on the same table?
Answer: Yes, Consider a category table in a e-commerce web site.
Category_Id, Category_Name, Parent_Category_ID. In this table all the parent categories are also categories. When we create a self join category id will be treated as foreign key to the same table.

4. What is Normalization? What are it’s rules?
Answer: Normalisation is the technique in the database design wher ethe idea is to reduce the redundancy of non key data items across the table.

§ Rule 1: There should be a one-to-one relationship between the instances of an entity and the rows of the table.

§ Rule 2: A field should have the same meaning in each row of the table.

§ Rule 3: Each table should represent at most one entity.

§ Rule 4: Multiple instances of an entity should be represented by multiple rows in a table.

§ Rule 5: Joins should be based only on primary and foreign-key equality.

§ Rule 6: Make sure keys are linked correctly.

5. What are the advantages and disadvantages of Normalization?
Answer: There are several advantages of normalization as under:

§ Faster sorting and index creation.

§ A larger number of clustered indexes.

§ Narrower and more compact indexes.

§ Fewer indexes per table, which improves the performance of INSERT, UPDATE, and DELETE statements

§ Fewer null values and less opportunity for inconsistency, which increase database compactness.
Beside the above benefits there are few disadvantages as well:

§ Increased amount of Normalization increases the amount of complexity of joins between tables and that hinders the performance.

6. What are the conditions to achieve the normalization?
Answer: There are few conditions to achieve the normalization:

§ There should be a unique row identifier.

§ A table should store only data for a single type of entity. For e.g. details for book’s publisher and book’s author should be saved under different table.

§ A table should avoid columns which can be null-able.

§ A table should avoid duplication of data and columns.

7. What is a Stored Procedure? State its advantage.
Answer: A stored procedure is a set of pre-compiled SQL commands (query statements), which are stored in the server. It is faster then the loose SQL statements processed on client, as it is pre-compiled. It can execute more then one SQL commands once as they are bundled in a single entity. We can use control statements within the stored procedure, which will allow us to repeat some SQL command. It can send return values depending upon the result. Stored procedures are used to reduce network traffic.

8. What is a Trigger?
Answer: Triggers are a special type of stored procedure, which gets invoked upon a certain event. They can be performed upon an INSERT, UPDATE and DELETE.

9. What is a Clustered Index?
Answer: The data rows are stored in order based on the clustered index key. Data stored is in a sequence of the index. In a clustered index, the physical order of the rows in the table is the same as the logical (indexed) order of the key values. A table can contain only one clustered index. A clustered index usually provides faster access to data than does a non-clustered index

10. What is a Non-Clustered Index?
Answer: The data rows are not stored in any particular order, and there is no particular order to the sequence of the data pages. In a non-clustered index, the physical order of the rows in the table is not same as the logical (indexed) order of the key values.

11. Describe the three levels of data abstraction?
The are three levels of abstraction:

§ Physical level: The lowest level of abstraction describes how data are stored.

§ Logical level: The next higher level of abstraction, describes what data are stored in database and what relationship among those data.

§ View level: The highest level of abstraction describes only part of entire database.

12. What is DDL (Data Definition Language)?
Answer: A data base schema which is specified by a set of definitions expressed by a special language is called DDL. Data Definition Language (DDL) is used to define and manage all the objects in an SQL database.

13. What is DML?
Answer: It is a special language used to manipulate the Data. Data Manipulation Language (DML), which is used to select, insert, update, and delete data in the objects defined using DDL.

14. What is a PRIMARY KEY?
Answer: The PRIMARY KEY is the column(s) used to uniquely identify each row of a table.

15. What is a FOREIGN KEY?
Answer: A FOREIGN KEY is one or more columns whose values are based on the PRIMARY or CANDITATE KEY values from the database.

16. What is a UNIQUE KEY?
Answer: A UNIQUE KEY is one or more columns that must be unique for each row of the table.

17. What is the difference between UNIQUE and PRIMARY KEY?
Answer: The UNIQUE KEY column restricts entry of duplicate values but entry of NULL value is allowed. In case of PRIMARY KEY columns entry of duplicate as well as <NULL> value is also restricted.

18. What is a VIEW?
Answer: A View is a database object that is a logical representation of a table. It is derived from a table but has no storage space of its own and often may be used in the same manner as a table.

19. What is a ROWID?
Answer: ROWID is the logical address of a row, and it is unique within the database.

20. What is INDEX?
Answer: INDEX is a general term for an SQL feature used primarily to speed up execution and impose UNIQUENESS upon data. You can use an index to gain fast access to specific information in a database table. An index is a structure that orders the values of one or more columns in a database table. The index provides pointers to the data values stored in specified columns of the table, and then orders those pointers according to the sort order you specify.

21. What is a cursor?
Answer: An entity that maps over a result set and establishes a position on a single row within the result set. After the cursor is positioned on a row, operations can be performed on that row, or on a block of rows starting at that position. The most common operation is to fetch (retrieve) the current row or block of rows.

22. The Difference between ‘Count’ and ‘Count (*)’?
Answer: ‘Count’: Counts the number of non-null values. ‘Count (*)’: Counts the number of rows in the table, including null values and duplicates.

Microsoft Silverlight

Dear .NET peoples and Microsoft lovers,

 Microsoft has released new amazing technology is called as Microsoft Silverlight.

Silverlight is a cross-browser, cross-platform plug-in for delivering the next generation of Microsoft .NET–based media experiences and rich interactive applications for the Web.

But do u know How did the name came?

                                             please read follow these lines…

source : Communitycredit 

(David Silverlight(communitycredit) met with Bill gates in Bill home)

When I met with Bill Gates a few months back, I thought that he was just kidding around. I remember the day well. I visited Bill at his home after he called me over to race one of those 34 sports cars he has in his garage. His house is as amazing as you may have heard about, when you walk in, the music is customized to your tastes… Weird Al was playing (White and Nerdy) in the background,  Videos of all the Atari 2600 games playing were shown on the walls. Even my favorite artwork was hanging (Dogs playing Poker). It was really a site to see.
We kicked back, drank a few beers, played some video games and were just chatting about the world in general. Then, of course, the conversation drifted to Microsoft and the things I was working on. He said, for all of your contributions to the development community I thought that I should honor you in some way that is way above the normal “MVP” or even “ACE Award” status. Below is a snippet of the conversation as I remember it:

Me: My instant reaction was “No way!!!, Are you going to autograph my copy of Vista?”.
Bill: Keep dreaming.
Me: “Are you going to offer me a that new “Chief Development Community Officer” position at Microsoft that I keep asking you about?” I even tried something worthy of such a role, I gave my rendition of “Developers, Developers, Developers, Developers.”
Bill: “Chief Development Community Officer”? ROFLOL(he actually pronounced ROFLOL, which made it funnier)
Me: Are you going to remove support for C# and force everybody to code in VB.NET?
Bill: Yes, but that is another conversation. Besides, you did win the race.
Me: Okay, I give up.
Bill: Good, you would never guess it anyway.
Bill: Name your favorite new technology? Any technology you like! (Now he had me really curious)
Me: Well, that is an easy one….WPF/E
Bill: Well, here it is…. We are going to name it after you!!!
Me: Microsoft David?!?!?
Bill: Even better, we are going to name it “Microsoft Silverlight”!!! Besides, remember what happened with Microsoft Bob.
Me: Wow (getting emotional). I don’t know what to say. When are you going to announce it?
Bill: May of this year.
Me: May!!!!! Can’t you do it any earlier? April, Maybe?
Bill: I will speak with the WPFE Team…or should I say the Silverlight Team and get them to move it up.
Me: Thanks, Bill

So that is the story of how Microsoft Silverlight came to be. I would like to thank everybody at the Academy, My Mom, Dad, all of the folks at Microsoft, and last but not least, Bill.

Wow, what a great honor..Go ahead David! You rocked…Fingers crossed..




Dear  .NET people,

                          You have one Apple and i have one apple,if we can exchange each have only one apple.But you have one idea and i have one idea,If we can exchange each have two ideas

so please start your communit activities; get cool prizes

What is CommunityCredit?
Community Credit is a way of showing your contribution to the technology community.  Community Credit helps show off the enthusiasm and passion you have for the success of our industry.

more here…




Microsoft Techmela

Microsoft TechMela 2007 | June 14, 15, 16 | Renaissance, Mumbai

Calling all developers, IT pros, architects, designers and technology enthusiasts…

Here’s all you wanted to know about TechMela 2007

TechMela – the defintive confluence of the latest technologies, technical expertise, and structured learning experiences.
Creating many pathways to knowledge exchange, TechMela comprises of technology presentations, scenario showcases, experience zones and discussion forums and parallel hands-on learning sessions, besides lots of networking opportunity, and of course – tonnes of fun!
This is one event you simply can’t afford to miss – no matter which technology stream you work in, or which level you work at.

3 Days  |   7 Tracks  |  150 Sessions  |  300 Labs… One place, at one time!  Register now!

Track 1 : Infrastructure Platform

Track 2 : Collaboration Platform

Track 3 : Application Platform

Track 4 : UX Platform

Track 5 : Web Platform

Track 6 : Mobility Platform

 Track 7 : Embedded Devices Platform

Venue details >>

City : Mumbai

Date :14-16th june 2007

Venue : Renaissance  Hotel and Convention Center

Address : #2 & 3B,Near Chinmayanand Ashram,Powai,Mumbai 400087(India)

Participation Fee

INR 9,000/- per participant
For group discounts, write to techmela@endtoend.in

For further details or queries, email techmela@endtoend.in

MUMBAI: RSVP: 022 – 6502.1700 | FAX: 022 – 4005 9922
BANGALORE: RSVP: 080 – 4116 1411 | FAX: 080 – 2521 3656
CHENNAI: RSVP: 044 – 2472 8113 | FAX: 044 – 2473 4247
DELHI: RSVP: 011 – 4655 2158 | FAX: 011 – 2622 3485


© 2007 Microsoft Corporation (India) Pvt. Ltd. | All Rights Reserved | Terms of Use | Privacy Statement |
If you are not able to view this page properly, please click here

Microsoft Office Online File Converters and Viewers

With the help of converters and viewers from Office Online, you can share your Microsoft Office files with people who have different versions of Office programs, or even with people who don’t have Office installed.

Converters allow you to open files created by people using different versions of your Office programs.

Viewers provide a means for people who don’t have Office programs to see your work. You can provide them with the appropriate viewer along with your Office files.

Access viewers
Excel converters and viewers
Outlook converters and viewers
PowerPoint converters and viewers
Microsoft Project converters
Visio converters and viewers
Word converters and viewers
Converters and viewers for Macintosh users

Biography of BillGates

William (Bill) H. Gates III William H. Gates
Microsoft Corporation

William (Bill) H. Gates is chairman of Microsoft Corporation, the worldwide leader in software, services and solutions that help people and businesses realize their full potential. Microsoft had revenues of US$39.79 billion for the fiscal year ending June 2005, and employs more than 61,000 people in 102 countries and regions.

On June 15, 2006, Microsoft announced that effective July 2008 Gates will transition out of a day-to-day role in the company to spend more time on his global health and education work at the Bill & Melinda Gates Foundation. After July 2008 Gates will continue to serve as Microsoft’s chairman and an advisor on key development projects. The two-year transition process is to ensure that there is a smooth and orderly transfer of Gates’ daily responsibilities. Effective June 2006, Ray Ozzie has assumed Gates’ previous title as chief software architect and is working side by side with Gates on all technical architecture and product oversight responsibilities at Microsoft. Craig Mundie has assumed the new title of chief research and strategy officer at Microsoft and is working closely with Gates to assume his responsibility for the company’s research and incubation efforts.

Born on Oct. 28, 1955, Gates grew up in Seattle with his two sisters. Their father, William H. Gates II, is a Seattle attorney. Their late mother, Mary Gates, was a schoolteacher, University of Washington regent, and chairwoman of United Way International.

Gates attended public elementary school and the private Lakeside School. There, he discovered his interest in software and began programming computers at age 13.

In 1973, Gates entered Harvard University as a freshman, where he lived down the hall from Steve Ballmer, now Microsoft’s chief executive officer. While at Harvard, Gates developed a version of the programming language BASIC for the first microcomputer – the MITS Altair.

In his junior year, Gates left Harvard to devote his energies to Microsoft, a company he had begun in 1975 with his childhood friend Paul Allen. Guided by a belief that the computer would be a valuable tool on every office desktop and in every home, they began developing software for personal computers. Gates’ foresight and his vision for personal computing have been central to the success of Microsoft and the software industry.

Under Gates’ leadership, Microsoft’s mission has been to continually advance and improve software technology, and to make it easier, more cost-effective and more enjoyable for people to use computers. The company is committed to a long-term view, reflected in its investment of approximately $6.2 billion on research and development in the 2005 fiscal year.

In 1999, Gates wrote Business @ the Speed of Thought, a book that shows how computer technology can solve business problems in fundamentally new ways. The book was published in 25 languages and is available in more than 60 countries. Business @ the Speed of Thought has received wide critical acclaim, and was listed on the best-seller lists of the New York Times, USA Today, the Wall Street Journal and Amazon.com. Gates’ previous book, The Road Ahead, published in 1995, held the No. 1 spot on the New York Times‘ bestseller list for seven weeks.

The Albuquerque Group, 1978
Top row: Steve Wood (left), Bob Wallace, Jim Lane. Middle row: Bob O’Rear, Bob Greenberg, Marc McDonald, Gordon Letwin. Bottom row: Bill Gates, Andrea Lewis, Marla Wood, Paul Allen. December 7, 1978.

Gates has donated the proceeds of both books to non-profit organizations that support the use of technology in education and skills development.

In addition to his love of computers and software, Gates founded Corbis, which is developing one of the world’s largest resources of visual information – a comprehensive digital archive of art and photography from public and private collections around the globe. He is also a member of the board of directors of Berkshire Hathaway Inc., which invests in companies engaged in diverse business activities.

Philanthropy is also important to Gates. He and his wife, Melinda, have endowed a foundation with more than $28.8 billion (as of January 2005) to support philanthropic initiatives in the areas of global health and learning, with the hope that in the 21st century, advances in these critical areas will be available for all people. The Bill and Melinda Gates Foundation has committed more than $3.6 billion to organizations working in global health; more than $2 billion to improve learning opportunities, including the Gates Library Initiative to bring computers, Internet Access and training to public libraries in low-income communities in the United States and Canada; more than $477 million to community projects in the Pacific Northwest; and more than $488 million to special projects and annual giving campaigns.

Gates was married on Jan. 1, 1994, to Melinda French Gates. They have three children. Gates is an avid reader, and enjoys playing golf and bridge.